As standard supplied with ‘hold open’ function allowing free entry when required without operating the code. Function can be disabled on installation requiring code to be entered every time to open the door.
Light duty with stainless steel latch bolt head, with “anti-shim” plunger, 2 ⅜” (60mm) back set requires 1” (25mm) hole, 3 ¼” (82mm) deep.
2” (50mm) back set latch requires 1” (25mm) x 2 ⅞” (72mm) hole.
2 ¾” (70mm) back set latch requires 1” (25mm) x 3 5⁄8" (92mm) hole.
Code Change Method
Locks come complete with a random code selected. The lock can be placed in EasyCode Function or QuickCode Function.
The EasyCode Function requires the lock to be removed form the door to change the code. This ensures a level of management control over who can change the code.
The QuickCode Function is an optional function that allows the code to be changed while the lock is fitted to the door. This is a convenient option in which code holders can quickly change codes and heighten door access. The CL160 code chamber consists of 10 buttons from which the code is selected. The ‘C’ button which is used to re-set the chamber after an incorrect entry, and which must always be used as the first digit of a code. The ‘A’ button is used to change the code.
A code, or combination, can be entered in any order or sequence; e.g. 1234 can be 4321 or 1342 or whatever sequence is most convenient to remember. With 10 buttons, over 1000 different codes are available, any of which can be entered in any sequence. Buttons may only be used ONCE in a code. For example, 1212 is not possible