gototopgototop
Telephone US: 714.979.2900


Codelocks

Shop by Category
You are currently in: Codelocks US CL1000 Troubleshooting Guide
CL1000 Troubleshooting Guide Print E-mail
Problem Probable Cause Action
Cabinet lock does not re- lock and remains "open" after unlocking Lock has been programmed to work in locker mode
 		 Refer to the code change and operation instructions for locker mode operation
Red LED flashes three times after entering correct code Batteries are low and need replacing
 		 Change batteries immediately.  See operating instructions
Cabinet door "rattles" when locked.
 		 Incorrect cam fitted.
Cam packing pieces not used
 		 Refit correct cam as necessary and use packing pieces supplied  if required.
Cabinet lock spindle not long enough to fit through cabinet door.  Cabinet door larger than 3/4" (inches) thick.  Contact Codelocks for alternative model Codelock 
Lock does not open and LED`s do not light when correct code is entered  Batteries have been drained or become disconnected  Use 9V override procedure to open lock as detailed in operating instructions and replace batteries 

Helpline - Locks Service and Spares:
Toll Free 1877 - 263 - 3562
 

Telephone US: 714.979.2900
NewsAbout UsSitemapContact Us

©2012 Codelocks US.